Details
The objective of this second module is to look at the concept of steam generation, and to present features of design and construction of boilers (steam generators). Both the water side and gas side of the boiler are dealt with, but the subject of combustion and burner equipment is left to the next tape.
Learning Objectives:
- The requirements for a basic boiler.
- The fire-tube boiler.
- Convection, natural circulation, and forced circulation.
- The need for feedwater to compensate for steam generated.
- Basic control of steam pressure, i.e. steam output flow versus heat input from combustion.
- Water-wall construction.
- The use of downcomers to feed riser tubes.
- Shrink and swell of water level.
- Heat transfer by radiation and conduction.
- The function of the steam drum.
- Steam drum internal hardware.
- Steam drum external connections.
- Boiler drains and blowdown valves.
- Superheater arrangements.
- Pendant and horizontal superheater construction.
- Superheater drains.
- Primary and secondary superheater banks.
- Attemperation for steam temperature control.
- Reheat bank arrangements.
- The air and gas path through the boiler.
- FD fans and ID fans.
- Comparison of balanced draft system and the pressurized furnace.
- Temperature gradient throughout the air and gas path.
- Function of the economizer and airheater.
- Boiler insulation and boiler casing.
- Access ports and doors.
- Typical construction of the heat recovery steam generator (HRSG).
- Sources of hot gas for the HRSG.
- Bypass damper arrangements.
- The multiple pressures HRSG
n/a
Congratulations of successfully completing your Course!
After completing this course the final exam must be passed with a 70% or higher in order to receive certificate of completion.